PLEASE NOTE the following before you make your purchase of the WHITLEY:

1. The WHITLEY is a 20L backpack, that's small in volume for some.

2. While the height of 18.5" and width of 11" is standard, the depth of the main compartment is only 5". 

3. If you have an existing backpack please check the volume of your pack to gauge how much smaller in volume the Whitley is.

The Whitley will be available in the following fabric / color options:

• X-Pac X42
• 500D Black
• 1050D Ballistic Nylon, Black

Lining in 210D ripstop orange

 Current VITALS:

• Dimensions, 18.5" (H) x 11" (W) x 6" (D)
• Weight, 2.6 lbs / 1.18 kg (500D Black), 2.66 lbs / 1.21 kg (X42), 3.02 lbs / 1.37 kg (1050D Ballistic Nylon)
• Volume, 20L

FEATURES:

• Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers

• Front organizer compartment, #8 YKK RC zippers:
• Rear document sleeve
• Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
• Two bottom elastic pleated pockets
• Compartment is entire height of backpack, 1" deep and unzips half way down

• Main compartment, #10 YKK RC zippers, 5" deep:
• Front wall, Top zippered pocket in matching lining fabric, 7" deep
• Front wall, Bottom zippered mesh pocket, 5" deep
• Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
• Padded tablet sleeve in front of the laptop sleeve
• An enhaced carry handle to for improved comfort and handling
• Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
• Adjustable and removable sternum straps
• Padded mesh back
• Luggage (handle) pass through
• Padded shoulder strap harness (new design)
• Removable leather patch

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.  

NOTE: Matching organizers can be found HERE (select the Crimson Wave option to match) and the sliders here.

When the AON Evade was first launched as the Recon 9, a 21L backpack, it quickly became a popular crowdsourced choice. Over time, it evolved into the 2.0 (30L) and the recent 1.5 (25L), but now, it has come full circle back to its original 21L size in the form of our first Evade 1.0X.

Product development is a collaborative effort, and the Evade 1.0X represents a significant step forward thanks to the valuable feedback from existing Evade owners and the dedicated contributions of remarkable individuals and collaborators…………..our dear friends and esteemed industry pros, David Valencic and Brandon Vulaj.

But what does the "X" signify?

The "X" commemorates the brand's 10th anniversary, coinciding with the 20th anniversary of our parent company, SERT. During its initial decade, AON was dedicated to creating products based on crowdsourced ideas and feedback. Our foundation in law enforcement and military gear production remained an integral part of this process. However, what's lesser-known is my personal background in the fashion industry, where I spent nearly 20 years contributing to prestigious brands like Armani, Kenzo, Comme des Garcons, Dolce & Gabbana, Karl Lagerfeld and DKNY (my first product development gig).

As we celebrate AON's 10th anniversary, we're proud to unveil the X series, starting with the Evade 1.0X. This time, together with assistance from Brandon & David, we're infusing my personal fashion sensibilities into the designs, merging what I think is the best of both worlds.

Warm regards.......HELM

The Evades 1.0X will be made available in batches on a first come, first serve basis, starting with the X50 variant. And yes there will only be one type, no more Fulls nor Lites.

Current DATA:

• Volume: 21L
• Weight: 3.5 lbs (1.575 kg)
• Dimensions: 18.5” (H) x 12” (Base) x 6” (D) (47 x 30.5 x 14 cm)

Shell: Dimension-Polyant’s X50, bottom of pack 1050D ballistic nylon

Interior: Fully lined in Challenge’s UltraGrid Dark Chili

Reinforced carry handle with with leather wrap

Zipper:

• YKK TPU Coated Reverse Coil #10 and #8; *bottom front zipper is #8 RC
• Leather zipper pulls

Webbing: Multi-column (aka car seat)

Main compartment:

• Front wall has our 2 zippered pockets design (top fabric, bottom mesh)
• Back wall holds the padded & suspended laptop and tablet sleeves.
• Back wall has a single layered PALS row at the top to allow use of Matroskya and other pouches.

Laptop Compartment:

• While the laptop sleeve is part of the main compartment, it is sealed off thus creating it's own compartment with access only via the top quick access zipper that's behind the carry handle.
• This seal is hook & loop and can adjusted +/- 0.5" to lower a slightly small or larger opening (front to back).
• Tested to fit up to a current 16" MacBook Pro.

Front pockets:

• Front organizer compartment has 2 sleeve pockets with large loop field, and a zippered pocket above it.
• Loop field is sized to hold existing Type 1 & 2 organizers and any hook & loop compatible pouch.
• Alternatively you can slip one of our Sliders in there.
• Top front quick access pocket
• Bottom stealth pocket with lip covering reverse coil zipper

Back panel and shoulder / strap harness is an updated version of the Whitley with new SBR close cell foam in the shoulder straps.

Flat side water bottle pockets; currently this has only been tested to hold the Hydroflask Trail (24oz).

Let's address some common questions:

• Q: Is the 1.0X a limited release?
• A: As with our previous launches, the 1.0X will be limited initially. Based on demand, feedback, and resonance with our audience, it could become a staple in our offerings.

• Q: Will the 1.0X be available in other fabrics?
• A: For now, it will only be offered in the X-Pac and UltraGrid combination. We're working on streamlining our product range, including fabrics and color choices.

• Q: Will the 1.0X come with alternative lining colors?
• A: No, the current lineup features a singular lining color.

• Q: Where will the 1.0X be available?
• A: The following stockists are expected to carry the launch:

Additional notes: 

There is no CCW compartment on this Evade.
There are no compression straps.
There are no loop patches on this pack apart from the removable leather patch.

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically. 

Current DATA:

• Volume: 21L
• Weight: 3.14 lbs (1.42 kg)
• Dimensions: 18” (H) x 12” (Base tapers to 9.5" top) x 6” (D) (45.7 x 30.5 x 15.3 cm)

Shell: 1000D Cordura Nylon for main body and 500D for back panel & inside of shoulder straps.

Interior (fabric combo):

• 1000D Black + 210D Ripstop Nylon, Gray

• 1000D Med Navy + 210D Ripstop Nylon, Gray

• 1000D Ranger Green + 210D Ripstop Nylon, Coyote Brown

• 1000D MCB + 210D Ripstop Nylon, Coyote Brown (future drop)

• 1000D Tiger Stripe + 210D Ripstop Nylon, Coyote Brown

• 1000D M81 Woodland + 210D Ripstop Nylon, Coyote Brown

Zipper: YKK Reverse Coil #10 and #8

Webbing: 17337

Main compartment:

• Front wall has our 2 zippered pockets design (top fabric, bottom mesh).
• Back wall holds the padded & suspended sleeve for your rucking plate or laptop.

Rucking Plate / Laptop Compartment:

• The sleeve design is a hybrid. It is part of the main compartment but it can be easily accessed via the top quick access zipper that's behind the carry handle.
• Tested to fit up to a current 15" MacBook Pro.

Front pockets:

• Top front QAP (quick access pocket) that is approximately 9" x 5.5" with a 4" x 2.25" loop patch in front with matching fabric cover.
• Side zippered access CCW pocket that is approximately 10" x 10".
• This CCW pocket has a loop back wall for you to mount a hook & loop compatible holster like our V-Kit.

Other Features:

• Back panel and shoulder / strap harness out of 500D and EVA close cell foam,
• Stretch bottle pockets out of MMI's SAMI Wander fabric, easily holds up to 40 oz Nalgene.
• Removable compression strap.
• Webbing mounts on the bottom of pack for optional carry straps.

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.