PRE-ORDER Fullfilment UPDATE, Aug 22nd, 2024:

ALL Whitleys are pre-orders only: Fulfillment starts end Sep

PLEASE NOTE the following before you make your purchase of the WHITLEY:

1. The WHITLEY is a 20L backpack, that's small in volume for some.

2. While the height of 18.5" and width of 11" is standard, the depth of the main compartment is only 5". 

3. If you have an existing backpack please check the volume of your pack to gauge how much smaller in volume the Whitley is.

The Whitley will be available in the following fabric / color options:

• X-Pac X42
• 500D Black
• 1050D Ballistic Nylon, Black

Lining in 210D ripstop orange

 Current VITALS:

• Dimensions, 18.5" (H) x 11" (W) x 6" (D)
• Weight, 2.6 lbs / 1.18 kg (500D Black), 2.66 lbs / 1.21 kg (X42), 3.02 lbs / 1.37 kg (1050D Ballistic Nylon)
• Volume, 20L

FEATURES:

• Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers

• Front organizer compartment, #8 YKK RC zippers:
• Rear document sleeve
• Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
• Two bottom elastic pleated pockets
• Compartment is entire height of backpack, 1" deep and unzips half way down

• Main compartment, #10 YKK RC zippers, 5" deep:
• Front wall, Top zippered pocket in matching lining fabric, 7" deep
• Front wall, Bottom zippered mesh pocket, 5" deep
• Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
• Padded tablet sleeve in front of the laptop sleeve
• An enhaced carry handle to for improved comfort and handling
• Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
• Adjustable and removable sternum straps
• Padded mesh back
• Luggage (handle) pass through
• Padded shoulder strap harness (new design)
• Removable leather patch

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.  

It goes without saying that here at AON, we are big proponents of the backpack. But sometimes, we need or prefer a smaller bag to conveniently carry our basic essentials that we use and need access to throughout the day. After almost 6 months of rigorous testing and evaluation, we are proud to announce the latest generation of our beloved Chio bag: the Chio-X! This bag was designed with convenience and versatility in mind, ensuring that you can take all your essentials with you wherever you go.

 NOTE: The new Chio Organizer is sold separately.

A YouTube video by PK Shiu has been added under 'Video Reviews'!

Story behind the original CHIO:

We designed the Chio bag to hold the basic essentials, and I carry what is shown in the video here. These items I carry daily, regardless of whether I'm back home, traveling stateside or internationally. I simply add or remove additional items depending on where I'm going and how long I'm going to be there. For domestic and international travel, I keep the Chio bag below the front seat on a flight, and keep everything else in my backpack in the luggage bins above. This is especially useful on long flights when the lights are out, and I don't want to rummage through my backpack in the bin.

Finally, for those photographers among us, I would like to also mention the availability of the optional Chio camera pouch add-on. This well-padded pouch has a hook bottom that helps secure it to the bottom of the Chio where you will find a corresponding inline strip of loop. Not only is this pouch a great addition to your Chio bag, it also doubles as a stand-alone bag with its own shoulder strap. In a quick instance, you can easily convert your Chio into a small camera bag, perfect for capturing those special moments........Helm @ AON

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically. 

NOTE: Matching organizers can be found HERE (select the Crimson Wave option to match) and the sliders here.

When the AON Evade was first launched as the Recon 9, a 21L backpack, it quickly became a popular crowdsourced choice. Over time, it evolved into the 2.0 (30L) and the recent 1.5 (25L), but now, it has come full circle back to its original 21L size in the form of our first Evade 1.0X.

Product development is a collaborative effort, and the Evade 1.0X represents a significant step forward thanks to the valuable feedback from existing Evade owners and the dedicated contributions of remarkable individuals and collaborators…………..our dear friends and esteemed industry pros, David Valencic and Brandon Vulaj.

But what does the "X" signify?

The "X" commemorates the brand's 10th anniversary, coinciding with the 20th anniversary of our parent company, SERT. During its initial decade, AON was dedicated to creating products based on crowdsourced ideas and feedback. Our foundation in law enforcement and military gear production remained an integral part of this process. However, what's lesser-known is my personal background in the fashion industry, where I spent nearly 20 years contributing to prestigious brands like Armani, Kenzo, Comme des Garcons, Dolce & Gabbana, Karl Lagerfeld and DKNY (my first product development gig).

As we celebrate AON's 10th anniversary, we're proud to unveil the X series, starting with the Evade 1.0X. This time, together with assistance from Brandon & David, we're infusing my personal fashion sensibilities into the designs, merging what I think is the best of both worlds.

Warm regards.......HELM

The Evades 1.0X will be made available in batches on a first come, first serve basis, starting with the X50 variant. And yes there will only be one type, no more Fulls nor Lites.

Current DATA:

• Volume: 21L
• Weight: 3.5 lbs (1.575 kg)
• Dimensions: 18.5” (H) x 12” (Base) x 6” (D) (47 x 30.5 x 14 cm)

Shell: Dimension-Polyant’s X50, bottom of pack 1050D ballistic nylon

Interior: Fully lined in Challenge’s UltraGrid Dark Chili

Reinforced carry handle with with leather wrap

Zipper:

• YKK TPU Coated Reverse Coil #10 and #8; *bottom front zipper is #8 RC
• Leather zipper pulls

Webbing: Multi-column (aka car seat)

Main compartment:

• Front wall has our 2 zippered pockets design (top fabric, bottom mesh)
• Back wall holds the padded & suspended laptop and tablet sleeves.
• Back wall has a single layered PALS row at the top to allow use of Matroskya and other pouches.

Laptop Compartment:

• While the laptop sleeve is part of the main compartment, it is sealed off thus creating it's own compartment with access only via the top quick access zipper that's behind the carry handle.
• This seal is hook & loop and can adjusted +/- 0.5" to lower a slightly small or larger opening (front to back).
• Tested to fit up to a current 16" MacBook Pro.

Front pockets:

• Front organizer compartment has 2 sleeve pockets with large loop field, and a zippered pocket above it.
• Loop field is sized to hold existing Type 1 & 2 organizers and any hook & loop compatible pouch.
• Alternatively you can slip one of our Sliders in there.
• Top front quick access pocket
• Bottom stealth pocket with lip covering reverse coil zipper

Back panel and shoulder / strap harness is an updated version of the Whitley with new SBR close cell foam in the shoulder straps.

Flat side water bottle pockets; currently this has only been tested to hold the Hydroflask Trail (24oz).

Let's address some common questions:

• Q: Is the 1.0X a limited release?
• A: As with our previous launches, the 1.0X will be limited initially. Based on demand, feedback, and resonance with our audience, it could become a staple in our offerings.

• Q: Will the 1.0X be available in other fabrics?
• A: For now, it will only be offered in the X-Pac and UltraGrid combination. We're working on streamlining our product range, including fabrics and color choices.

• Q: Will the 1.0X come with alternative lining colors?
• A: No, the current lineup features a singular lining color.

• Q: Where will the 1.0X be available?
• A: The following stockists are expected to carry the launch:

Additional notes: 

There is no CCW compartment on this Evade.
There are no compression straps.
There are no loop patches on this pack apart from the removable leather patch.

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically. 

Vitals:

• Dimension - 20.5” H x 12.5” W x 6.75” D ( 520 x 320 x 195 mm)
• Weight - 3.9 lbs (1.77 kg), pack without organizer
• Volume - approximately 30L
• Exterior Fabric - Dimension-Polyant’s X50 Tactical (currently BLACK only)
• Exterior laser cut PALS panel is Brookwood's Squadron fabric
• Interior Lining - 210D Ripstop Nylon (Orange)
• WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps, sternum strap
• 17337 Webbing 

Main Compartment:

• #10 YKK RC zippers
• 3 mesh zippered pockets on the front wall
• Pleated sleeve on the back wall, 14.75" tall (375 mm)
  

Laptop Compartment:

• Clamshell opening, #10 YKK RC zippers
• Loop patch for Type 1 or Type 2 organizer on the front wall
• Document sleeve behind loop patch
• 2 Tweave pockets below loop patch
• Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15.5" wide x 11.5" deep and 1" thick (394 x 292 x 25 mm)
• Padded tablet sleeve

Other Details:

• Front loop patch, 9.5" x 1.75" (241 x 44 mm)
• Front zippered (#8 YKK RC) pocket hidden behind the loop patch, 9.75" (W) base tapers to 7" top x 6" H (241 -> 178 x 152 mm)
• Double side removable compression straps with WooJin buckle with secondary mounting point (front or rear of laptop compartment)
• Padded mesh back
• Padded Hip Belt - same design as our current ones for the Evade except this is in X50 Tactical.
• Beavertail - this is a different design specifically for the SC2.0 and it is in 500D.

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and locally.

Remember, when in doubt about any of this, please contact us directly!

Thanks!

An in-house Alpha One Niner design, our Baguette Hauler is made from Challenge Sailcloth UltraGrid, the world’s first recycled nylon grid fabric with Ultra ripstop.

Challenge Sailcloth has taken a classic fabric to the next level with higher performance and lower environmental impact.  UltraGrid is woven with 210d recycled nylon yarn from pre-consumer industrial waste.  A double 200d Ultra grid provides exceptional tear-strength and visual impact.

This unique double Ultra grid reduces weight and doubles tear strength and has a tensile strength 15x stronger than steel.

The Baguette Hauler is currently only available in the following fabric / color option:

• UltraGrid, Black

 Current VITALS:

• Dimensions, unpacked - 16" (H) x 13" (W) x 5" (D) (40 x 33 x 12.5 cm)
• Dimensions, packed - 7" (W) x 10" (W) x 1" (D) (25.5 x 18 x 0.25 cm)
• Weight, 9.3 oz (264g)
• Volume, 17L 
• Carry Handles, Long - 25"
• Grab Handles, Short - 10.5"

FEATURES:

• Multi column webbing handles and front daisy chain loops 

• Two carry handles sets

• Front loop patch

• Inner hanging zippered pouch with YKK coil zipper

• YKK Mil-spec brass snap center of the tote opening
  

• All internal seams are piped.

WEEKENDER Duffel

Introducing the enhanced and upgraded version of our renowned Recon 6 duffel bag – the ultimate companion for your journeys! Crafted to meet rigorous mil-spec standards for exceptional durability and designed with a focus on simplicity, this bag is built to exceed your expectations.

Unzipping the robust #10 YKK zippers reveals a meticulously organized interior. On one side, you'll find two generously sized open top stretch sleeve pockets, perfect for effortlessly organizing your belongings. On the opposite side, there is an additional sleeve pocket featuring a convenient webbing hook and loop closure, specifically designed to securely hold a tablet or similar device. Rest assured, all your essentials will find their rightful place within the spacious main compartment, regardless of the nature of your gear.

As with all our meticulously crafted bags, the WEEKENDER showcases our new distinctive touch. This latest edition boasts two front pockets, both thoughtfully padded to ensure the safety of your belongings. In this revised version, we have adorned the flap covers of these pockets with exquisite full-grain leather, elevating both the style and functionality of the bag. The magnetic closure adds an extra layer of convenience, ensuring quick and easy access to your essentials while maintaining a sleek and sophisticated appearance.

Whether you're embarking on a weekend getaway or an adventurous expedition, the new and improved WEEKENDER is engineered to accompany you every step of the way. Experience the epitome of quality, design, and versatility with this remarkable duffel bag.

Upgrade to the new WEEKENDER and unlock limitless possibilities for your travels.

FEATURES & BENEFITS

• Exterior made of Dimension-Polyant's Black X50 and 1050D Ballistic Nylon Black
• Genuine #10 & #8 YKK zippers with leather pulls
• Custom metal hardware
• Two (2) padded Front Pockets with double magnetic flaps, and a quick stash sleeve behind each  pocket
• Removable nylon shoulder straps with leather pads
• Dual layer reinforced handles in multi-column webbing with leather wrap handles
• UltraGrid Dark Chili nylon lined interior
• Shoulder straps that are adjustable on the go
• Fully taped seams

SPECIFICATIONS

• Exterior dimensions - 22.5" (Width) x 10.5" (Height), and it tapers from a base of 9.5" to 7.5" at the top (cross section)( 57cm x 27cm x 24 to 19cm )
• Weight - 2.9 pounds ( 1.31 kilo )
• ASTM Measured Capacity - 36 liters / 2200 cu in

All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.