An in-house Alpha One Niner design, our Baguette Hauler is made from Challenge Sailcloth UltraGrid, the world’s first recycled nylon grid fabric with Ultra ripstop.
Challenge Sailcloth has taken a classic fabric to the next level with higher performance and lower environmental impact.UltraGrid is woven with 210d recycled nylon yarn from pre-consumer industrial waste.A double 200d Ultra grid provides exceptional tear-strength and visual impact.
This unique double Ultra grid reduces weight and doubles tear strength and has a tensile strength 15x stronger than steel.
The Baguette Hauler is currently only available in the following fabric / color option:
UltraGrid, Black
CurrentVITALS:
Dimensions, unpacked - 16" (H) x 13" (W) x 5" (D) (40 x 33 x 12.5 cm)
Dimensions, packed - 7" (W) x 10" (W) x 1" (D) (25.5 x 18 x 0.25 cm)
Weight, 9.3 oz (264g)
Volume, 17L
Carry Handles, Long - 25"
Grab Handles, Short - 10.5"
FEATURES:
Multi column webbinghandles and front daisy chain loops
Two carry handles sets
Front loop patch
Inner hanging zippered pouch with YKK coil zipper
YKK Mil-spec brass snap center of the tote opening
All internal seams are piped.
The Baguette Hauler is currently only available in the following fabric / color option:
UltraGrid, Black
Current VITALS:
Dimensions, unpacked - 16" (H) x 13" (W) x 5" (D) (40 x 33 x 12.5 cm)
Dimensions, packed - 7" (W) x 10" (W) x 1" (D) (25.5 x 18 x 0.25 cm)
Weight, 9.3 oz (264g)
Volume, 17L
Carry Handles, Long - 25"
Grab Handles, Short - 10.5"
FEATURES:
Multi column webbinghandles and front daisy chain loops
Two carry handles sets
Front loop patch
Inner hanging zippered pouch with YKK coil zipper
YKK Mil-spec brass snap center of the tote opening
It all started with personal shoe bags I have that don't fit any of my Salomons, Lowas, Vasques, Zamberlans or any of my chukka or desert boots. These easily fit up to a size 13 and some 14s.
Constructed out of 210D Ripstop Nylon (Coyote Brown, Black and Orange), dual #8 YKK reversible zippers, mesh and WooJin molded pulls. Plus a close cell foam padded base.
Photos show examples of selected boots and corresponding sizes of each pair.
It goes without saying that here at AON, we are big proponents of the backpack. But sometimes, we need or prefer a smaller bag to conveniently carry our basic essentials that we use and need access to throughout the day. After almost 6 months of rigorous testing and evaluation, we are proud to announce the latest generation of our beloved Chio bag: the Chio-X! This bag was designed with convenience and versatility in mind, ensuring that you can take all your essentials with you wherever you go.
A YouTube video by PK Shiu has been added under 'Video Reviews'!
Story behind the original CHIO:
We designed the Chio bag to hold the basic essentials, and I carry what is shown in the video here. These items I carry daily, regardless of whether I'm back home, traveling stateside or internationally. I simply add or remove additional items depending on where I'm going and how long I'm going to be there. For domestic and international travel, I keep the Chio bag below the front seat on a flight, and keep everything else in my backpack in the luggage bins above. This is especially useful on long flights when the lights are out, and I don't want to rummage through my backpack in the bin.
Finally, for those photographers among us, I would like to also mention the availability of the optional Chio camera pouch add-on. This well-padded pouch has a hook bottom that helps secure it to the bottom of the Chio where you will find a corresponding inline strip of loop. Not only is this pouch a great addition to your Chio bag, it also doubles as a stand-alone bag with its own shoulder strap. In a quick instance, you can easily convert your Chio into a small camera bag, perfect for capturing those special moments........Helm @ AON
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
Available only in Dimension Polyant's X42 Black and Challenge Outdoor's EPX240 in Black, Blue and Gray.
Inside zippered pocket and lining in red 210D nylon ripstop for X42 and red 200D Oxford nylon for EPX240.
1050D ballistic nylon base (bottom of Chio)
Dimensions 13.5" (w) x 10" (H) x 3.5" (D)
Volume approximately 9 liters / 550 cu2 (not including side Tweave pockets)
Weight approximately 1.2 pounds (0.55 kg)
A total of 6 (six) zippered pockets; 2 in front, 3 in rear and the main compartment.
Two (20 internal sleeve pockets on the front wall of main compartment.
One (1) suspended zippered pocket on the rear wall of the main compartment.
Rear zippered pocket concealed/covert compartment - internal side mounting points for optional organizer
Dual adjustable Shoulder Straps (4-panel webbing)
Side pleated Tweave pockets for small water bottles, quick stash, etc,
#10 Reverse YKK zipper for main compartment and #8 for all other zippered pockets.
The AON Evade 1.0X, originally the Recon 9, returns to its 21L roots in this special edition marking Alpha One Niner's 10th anniversary. A testament to collaborative innovation, this backpack blends robust functionality with high fashion expertise, symbolizing a harmonious fusion of utility and style.
NOTE: Matching organizers can be found HERE (select the Crimson Wave option to match) and the sliders here.
When the AON Evade was first launched as the Recon 9, a 21L backpack, it quickly became a popular crowdsourced choice. Over time, it evolved into the 2.0 (30L) and the recent 1.5 (25L), but now, it has come full circle back to its original 21L size in the form of our first Evade 1.0X.
Product development is a collaborative effort, and the Evade 1.0X represents a significant step forward thanks to the valuable feedback from existing Evade owners and the dedicated contributions of remarkable individuals and collaborators…………..our dear friends and esteemed industry pros, David Valencic and Brandon Vulaj.
But what does the "X" signify?
The "X" commemorates the brand's 10th anniversary, coinciding with the 20th anniversary of our parent company, SERT. During its initial decade, AON was dedicated to creating products based on crowdsourced ideas and feedback. Our foundation in law enforcement and military gear production remained an integral part of this process. However, what's lesser-known is my personal background in the fashion industry, where I spent nearly 20 years contributing to prestigious brands like Armani, Kenzo, Comme des Garcons, Dolce & Gabbana, Karl Lagerfeld and DKNY (my first product development gig).
As we celebrate AON's 10th anniversary, we're proud to unveil the X series, starting with the Evade 1.0X. This time, together with assistance from Brandon & David, we're infusing my personal fashion sensibilities into the designs, merging what I think is the best of both worlds.
Warm regards.......HELM
The Evades 1.0X will be made available in batches on a first come, first serve basis, starting with the X50 variant. And yes there will only be one type, no more Fulls nor Lites.
Current DATA:
Volume: 21L
Weight: 3.5 lbs (1.575 kg)
Dimensions: 18.5” (H) x 12” (Base) x 6” (D) (47 x 30.5 x 14 cm)
Shell: Dimension-Polyant’s X50, bottom of pack 1050D ballistic nylon
Interior: Fully lined in Challenge’s UltraGrid Dark Chili
Reinforced carry handle with with leather wrap
Zipper:
YKK TPU Coated Reverse Coil #10 and #8; *bottom front zipper is #8 RC
Leather zipper pulls
Webbing: Multi-column (aka car seat)
Main compartment:
Front wall has our 2 zippered pockets design (top fabric, bottom mesh)
Back wall holds the padded & suspended laptop and tablet sleeves.
Back wall has a single layered PALS row at the top to allow use of Matroskya and other pouches.
Laptop Compartment:
While the laptop sleeve is part of the main compartment, it is sealed off thus creating it's own compartment with access only via the top quick access zipper that's behind the carry handle.
This seal is hook & loop and can adjusted +/- 0.5" to lower a slightly small or larger opening (front to back).
Tested to fit up to a current 16" MacBook Pro.
Front pockets:
Front organizer compartment has 2 sleeve pockets with large loop field, and a zippered pocket above it.
Loop field is sized to hold existing Type 1 & 2 organizers and any hook & loop compatible pouch.
Alternatively you can slip one of our Sliders in there.
Top front quick access pocket
Bottom stealth pocket with lip covering reverse coil zipper
Back panel and shoulder / strap harness is an updated version of the Whitley with new SBR close cell foam in the shoulder straps.
Flat side water bottle pockets; currently this has only been tested to hold the Hydroflask Trail (24oz).
Let's address some common questions:
Q: Is the 1.0X a limited release?
A: As with our previous launches, the 1.0X will be limited initially. Based on demand, feedback, and resonance with our audience, it could become a staple in our offerings.
Q: Will the 1.0X be available in other fabrics?
A: For now, it will only be offered in the X-Pac and UltraGrid combination. We're working on streamlining our product range, including fabrics and color choices.
Q: Will the 1.0X come with alternative lining colors?
A: No, the current lineup features a singular lining color.
Q: Where will the 1.0X be available?
A: The following stockists are expected to carry the launch:
There is no CCW compartment on this Evade. There are no compression straps. There are no loop patches on this pack apart from the removable leather patch.
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
Current DATA:
Volume: 21L
Weight: 3.5 lbs (1.575 kg)
Dimensions: 18.5” (H) x 12” (Base) x 6” (D) (47 x 30.5 x 14 cm)
Shell: Dimension-Polyant’s X50, bottom of pack 1050D ballistic nylon
Interior: Fully lined in Challenge’s UltraGrid Dark Chili
Reinforced carry handle with with leather wrap
Zipper:
YKK TPU Coated Reverse Coil #10 and #8; *bottom front zipper is #8 RC
Leather zipper pulls
Webbing: Multi-column (aka car seat)
Main compartment:
Front wall has our 2 zippered pockets design (top fabric, bottom mesh)
Back wall holds the padded & suspended laptop and tablet sleeves.
Back wall has a single layered PALS row at the top to allow use of Matroskya and other pouches.
Laptop Compartment:
While the laptop sleeve is part of the main compartment, it is sealed off thus creating it's own compartment with access only via the top quick access zipper that's behind the carry handle.
Tested to fit up to a current 16" MacBook Pro.
Front pockets:
Front organizer compartment has 2 sleeve pockets with large loop field, and a zippered pocket above it.
Loop field is sized to hold existing Type 1 & 2 organizers and any hook & loop compatible pouch.
Alternatively you can slip one of our Sliders in there.
Top front quick access pocket
Bottom stealth pocket with lip covering reverse coil zipper
Back panel and shoulder / strap harness is an updated version of the Whitley with new SBR close cell foam in the shoulder straps.
Flat side water bottle pockets; currently this has only been tested to hold the Hydroflask Trail (24oz).
THESE ARE PRE-ORDERS, please read all notes belo.
Meet the next-generation of our award winning Alpha One Niner EVADE 1.5, one of the best EDC backpack with laptop compartment. A Carryology favorite, it offers a blend of style and practicality. Lighter, with improved straps, an organized layout, and versatile material options. Perfect for your daily EDC.
Our next gen (2024) EVADE 1.5 backpack!
PRE-ORDER Fullfilment UPDATE, Aug 22nd, 2024:
Evade 1.5, 500D Black & 630D HD Twill Black: Mid Sep
500D, Black + 210D UHMWPE Ripstop Nylon, Crimson Wave
630D HD Twill + 210D UHMWPE Ripstop Nylon, Crimson Wave
500D MCB + 210D Ripstop Nylon, Coyote Brown
500D OD + 210D Ripstop Nylon, Coyote Brown
500D Ranger Green + 210D Ripstop Nylon, Coyote Brown
500D Coyote Brown + 210D Ripstop Nylon, Coyote Brown
Zipper: YKK Reverse Coil #10 and #8; *bottom front zipper is #8 RC
Webbing: 17337
Main compartment:
Front wall has our 2 zippered pockets design (top fabric, bottom mesh)
Back wall holds the padded & suspended laptop and tablet sleeves.
Back wall has a single layered PALS row at the top to allow use of Matroskya and other pouches.
Laptop Compartment:
The laptop sleeve design is a hybrid. It is part of the main compartment but it is sealed off thus creating it's own compartment with access only via the top quick access zipper that's behind the carry handle.
Tested to fit up to a current 16" MacBook Pro.
Front pockets:
Front organizer compartment has 2 sleeve pockets with large loop field, and a zippered pocket above it.
Loop field is sized to hold existing Type 1 & 2 organizers (sold separately) and any hook & loop compatible pouch.
It will also accommodate our Sliders (sold separately) in there.
A velcro closure sleeve pocket sized to accommodate one half of a small Magnepatch for those who want to add a loop patch to the front of the Evade.
Removable split key ring - key fob holder.
Top front quick access pocket lined in Nilex.
Bottom stealth pocket with lip covering reverse coil zipper.
Other Features:
Back panel and shoulder / strap harness is an updated version of the Whitley with new SBR close cell foam in the shoulder straps.
It’s a backpack with luggage sleeve (pass through).
Flat side water bottle pockets that are 1" taller than the ones on the Stealth Cobra; currently this has only been tested to hold up to the Hydroflask Trail (32oz).
PALS Loop Panel, for the back wall (in development)
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
500D, Black + 210D UHMWPE Ripstop Nylon, Crimson Wave
630D HD Twill + 210D UHMWPE Ripstop Nylon, Crimson Wave
500D MCB + 210D Ripstop Nylon, Coyote Brown
500D OD + 210D Ripstop Nylon, Coyote Brown
500D Ranger Green + 210D Ripstop Nylon, Coyote Brown
500D Coyote Brown + 210D Ripstop Nylon, Coyote Brown
Zipper: YKK Reverse Coil #10 and #8; *bottom front zipper is #8 RC
Webbing: 17337
Main compartment:
Front wall has our 2 zippered pockets design (top fabric, bottom mesh)
Back wall holds the padded & suspended laptop and tablet sleeves.
Back wall has a single layered PALS row at the top to allow use of Matroskya and other pouches.
Laptop Compartment:
The laptop sleeve design is a hybrid. It is part of the main compartment but it is sealed off thus creating it's own compartment with access only via the top quick access zipper that's behind the carry handle.
Tested to fit up to a current 16" MacBook Pro.
Front pockets:
Front organizer compartment has 2 sleeve pockets with large loop field, and a zippered pocket above it.
Loop field is sized to hold existing Type 1 & 2 organizers (sold separately) and any hook & loop compatible pouch.
It will also accommodate our Sliders (sold separately) in there.
Removable split key ring - key fob holder.
Top front quick access pocket lined in Nilex.
Bottom stealth pocket with lip covering reverse coil zipper.
Other Features:
Back panel and shoulder / strap harness is an updated version of the Whitley with new SBR close cell foam in the shoulder straps.
It’s a backpack with luggage sleeve (pass through).
Flat side water bottle pockets that are 1" taller than the ones on the Stealth Cobra; currently this has only been tested to hold up to the Hydroflask Trail (32oz).
Magnepatch (single layer only with corresponding plate)
PALS Loop Panel, for the back wall (in development)
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
Alpha One Niner, Hand-Made Leather Travel Watch Roll
Regular price
$96.00
Sale price
$49.00
Save $47.00
Our hand-made leather watch rolls are carefully designed to carry 3 watches for your travels. This traditional design lies flat when open, and it rolls up into a compact kit, perfect when packing space is a premium. Simply place your watches in the slots, fold the leather flap over, roll, and secure the roll with the leather cord.
Each roll is hand-stitched and therefore is unique, and can vary slightly in color and dimensions.
FEATURES:
A combination of Japanese and Italian leather
Holds 3 x watches, 2 x straps and 1 x watch band spring bar tool
Fastens with matching leather cord
DIMENSIONS:
Each roll is 11.75" x 6.75" (300mm x 170mm) when laying flat.
First watch slot is 2.75" wide (69mm) and the other two are 2.5" wide (65mm)
Our Matroskya pouches are named after the Russian nesting dolls of old and designed for the Recon 9 EVADE, Evade 2.0 and now the new Evade 1.5 backpacks. Each set comes with four differently sized pouches, each nested inside the other.
It is currently available in:
Black
Red
Blue
Clear PVC
Each pouch has 2 (two) zippered compartments; a vertical in front and a horizontal in the rear.
Each pouch is easily mounted by slotting the top 1" rectangular buckle (what we call a hanger) into any PALS webbing setup (what some call a MOLLE panel) or a d-ring of appropriate size so as to hold it in place.
Dimensions of the largest to smallest as follows:
15" x 10.75"
12" x 8.75"
9.5" x 7.75"
7.5" x 5.5"
The largest 2 (two) pouches has 2 (two) hangers and the smallest 2 (two) have only 1 (one) each. These pouches are extremely versatile can be used to hold anything from IFAKs, toiletries to a change of clothing.
Introducing the SLIDER, our latest organizer variant, developed as a result of request from many who are looking for our standard organizers for packs and bags that lack organization. Designed with the same setup and dimensions as our popular Type 01 and 02 organizers, the SLIDER is stiffer.
What sets the SLIDER apart is its unique webbing handle, which allows you to easily move it from one slip pocket to another on your backpack or bag. Unlike our standard organizers, the SLIDER does not come with any hook in the rear or clips.
With the SLIDER, you can keep your EDC gear organized and easily accessible in any slip pocket that is large enough to accommodate it. Upgrade your EDC game with the SLIDER today!
These Sliders are available in both our Type 01 or 02 (with the elastic webbing) configuration.
Material, 210D nylon ripstop.
Available in red, orange, black, coyote brown and Crimson Wave
These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx)
These are our optional padded hip (waist) belts for our top selling Evade backpacks! The hip belts can also be use for other backpacks as long as the mounting or clip-on point is a webbing that is no more than 1.5"
These are available in:
500D Black, OD, Ranger Green
500D Multicam Black
420D Diamond Ripstop Black, Gray and Med Navy
1050D Ballistic Nylon Black
X42 Black
X42 Olive
630D HD Twill
def
Alpha One Niner, Unipanel Trucker Mesh Fitted Cap, Embroidered
Introducing the enhanced and upgraded version of our renowned Recon 6 duffel bag – the ultimate companion for your journeys! Crafted to meet rigorous mil-spec standards for exceptional durability and designed with a focus on simplicity, this bag is built to exceed your expectations.
Unzipping the robust #10 YKK zippers reveals a meticulously organized interior. On one side, you'll find two generously sized open top stretch sleeve pockets, perfect for effortlessly organizing your belongings. On the opposite side, there is an additional sleeve pocket featuring a convenient webbing hook and loop closure, specifically designed to securely hold a tablet or similar device. Rest assured, all your essentials will find their rightful place within the spacious main compartment, regardless of the nature of your gear.
As with all our meticulously crafted bags, the WEEKENDER showcases our new distinctive touch. This latest edition boasts two front pockets, both thoughtfully padded to ensure the safety of your belongings. In this revised version, we have adorned the flap covers of these pockets with exquisite full-grain leather, elevating both the style and functionality of the bag. The magnetic closure adds an extra layer of convenience, ensuring quick and easy access to your essentials while maintaining a sleek and sophisticated appearance.
Whether you're embarking on a weekend getaway or an adventurous expedition, the new and improved WEEKENDER is engineered to accompany you every step of the way. Experience the epitome of quality, design, and versatility with this remarkable duffel bag.
Upgrade to the new WEEKENDER and unlock limitless possibilities for your travels.
FEATURES & BENEFITS
Exterior made of Dimension-Polyant's Black X50 and 1050D Ballistic Nylon Black
Genuine #10 & #8 YKK zippers with leather pulls
Custom metal hardware
Two (2) padded Front Pockets with double magnetic flaps, and a quick stash sleeve behind each pocket
Removable nylon shoulder straps with leather pads
Dual layer reinforced handles in multi-column webbing with leather wrap handles
UltraGrid Dark Chili nylon lined interior
Shoulder straps that are adjustable on the go
Fully taped seams
SPECIFICATIONS
Exterior dimensions - 22.5" (Width) x 10.5" (Height), and it tapers from a base of 9.5" to 7.5" at the top (cross section)( 57cm x 27cm x 24 to 19cm )
Weight - 2.9 pounds ( 1.31 kilo )
ASTM Measured Capacity - 36 liters / 2200 cu in
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
FEATURES & BENEFITS
Exterior made of Dimension-Polyant's Black X50 and 1050D Ballistic Nylon Black
Genuine #10 & #8 YKK zippers with leather pulls
Genuine Duraflex / WooJin hardware
Two (2) padded Front Pockets with double magnetic flaps, and a sleeve pocket behind each
Removable nylon shoulder straps with leather pads
Dual layer reinforced handles in multi-column webbing with leather wrap handles
Oxford nylon lined interior
Shoulder straps that adjustable on the go (cam buckle)
Fully taped seams
SPECIFICATIONS
Exterior dimensions - 22.5" (Width) x 10.5" (Height), and it tapers from a base of 9.5" to 7.5" at the top (cross section)( 57cm x 27cm x 24 to 19cm )
Experience the best EDC backpack with laptop compartment for work and college, the Alpha One Niner WHITLEY. Honored by Carryology as the best everyday backpack in 2022, this backpack expertly combines top-tier design with unmatched functionality. Ideal for daily commutes and professional use, it offers unparalleled durability, comfort, and style. Recognized for its excellence, the Whitley is your perfect partner for carrying essentials with ease and sophistication.
PRE-ORDER Fullfilment UPDATE, Aug 22nd, 2024:
ALL Whitleys are pre-orders only: Fulfillment starts end Sep
PLEASE NOTE the following before you make your purchase of the WHITLEY:
1. The WHITLEY is a 20L backpack, that's small in volume for some.
2. While the height of 18.5" and width of 11" is standard, the depth of the main compartment is only 5".
3. If you have an existing backpack please check the volume of your pack to gauge how much smaller in volume the Whitley is.
The Whitley will be available in the following fabric / color options:
X-Pac X42
500D Black
1050D Ballistic Nylon, Black
Lining in 210D ripstop orange
Current VITALS:
Dimensions, 18.5" (H) x 11" (W) x 6" (D)
Weight, 2.6 lbs / 1.18 kg (500D Black), 2.66 lbs / 1.21 kg (X42), 3.02 lbs / 1.37 kg (1050D Ballistic Nylon)
Volume, 20L
FEATURES:
Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers
Front organizer compartment, #8 YKK RC zippers:
Rear document sleeve
Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
Two bottom elastic pleated pockets
Compartment is entire height of backpack, 1" deep and unzips half way down
Main compartment, #10 YKK RC zippers, 5" deep:
Front wall, Top zippered pocket in matching lining fabric, 7" deep
Front wall, Bottom zippered mesh pocket, 5" deep
Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
Padded tablet sleeve in front of the laptop sleeve
An enhaced carry handle to for improved comfort and handling
Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
Adjustable and removable sternum straps
Padded mesh back
Luggage (handle) pass through
Padded shoulder strap harness (new design)
Removable leather patch
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
The Whitley will be available in the following fabric / color options:
X-Pac X42
500D Black
1050D Ballistic Nylon, Black
Lining in 210D ripstop orange
Current VITALS:
Dimensions, 18.5" (H) x 11" (W) x 6" (D)
Weight, 2.6 lbs / 1.18 kg (500D Black), 2.66 lbs / 1.21 kg (X42), 3.02 lbs / 1.37 kg (1050D Ballistic Nylon)
Volume, 20L
FEATURES:
Front stash pocket lined in Nilex, 7.5" deep, #8 YKK RC zippers
Front organizer compartment, #8 YKK RC zippers:
Rear document sleeve
Top organizer (revised Evade design) with padded phone pocket (holds up to iPhone 13 Max), 2 pen slots, 1 light / multitool slot, card holders, rear zippered pocket
Two bottom elastic pleated pockets
Compartment is entire height of backpack, 1" deep and unzips half way down
Main compartment, #10 YKK RC zippers, 5" deep:
Front wall, Top zippered pocket in matching lining fabric, 7" deep
Front wall, Bottom zippered mesh pocket, 5" deep
Rear wall, Suspended & padded slim laptop sleeve for up to a 16" MBP
Padded tablet sleeve in front of the laptop sleeve
An enhaced carry handle to for improved comfort and handling
Quick access zippered opening (behind carry handle) with #8 YKK RC zippers to get to your laptop & tablet
Adjustable and removable sternum straps
Padded mesh back
Luggage (handle) pass through
Padded shoulder strap harness (new design)
Removable leather patch
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and domestically.
AON, Compression Strap (Pair)(Adjustable) with WooJin Magnetic Buckle
Dimension - 20.5” H x 12.5” W x 6.75” D ( 520 x 320 x 195 mm)
Weight - 3.9 lbs (1.77 kg), pack without organizer
Volume - approximately 30L
Exterior Fabric - Dimension-Polyant’s X50 Tactical (currently BLACK only)
Exterior laser cut PALS panel is Brookwood's Squadron fabric
Interior Lining - 210D Ripstop Nylon (Orange)
WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps, sternum strap
17337 Webbing
Main Compartment:
#10 YKK RC zippers
3 mesh zippered pockets on the front wall
Pleated sleeve on the back wall, 14.75" tall (375 mm)
Laptop Compartment:
Clamshell opening, #10 YKK RC zippers
Loop patch for Type 1 or Type 2 organizer on the front wall
Document sleeve behind loop patch
2 Tweave pockets below loop patch
Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15.5" wide x 11.5" deep and 1" thick (394 x 292 x 25 mm)
Padded tablet sleeve
Other Details:
Front loop patch, 9.5" x 1.75" (241 x 44 mm)
Front zippered (#8 YKK RC) pocket hidden behind the loop patch, 9.75" (W) base tapers to 7" top x 6" H (241 -> 178 x 152 mm)
Double side removable compression straps with WooJin buckle with secondary mounting point (front or rear of laptop compartment)
Padded mesh back
Padded Hip Belt - same design as our current ones for the Evade except this is in X50 Tactical.
Beavertail - this is a different design specifically for the SC2.0 and it is in 500D.
All our products are developed and manufactured in our own Studio in Saigon, Vietnam using materials sourced from the US, Korea, Taiwan and locally.
Dimension - 20.5” H x 12.5” W x 7.5” D (520 x 320 x 195 mm)
Weight - 3.9 lbs (1.77 kg)
Volume - approximately 30L
Exterior Fabric - Dimension-Polyant’s X50 Tactical (currently BLACK only)
Exterior laser cut PALS panel is Brookwood's Squadron fabric
Interior Lining - 210D Ripstop Nylon (Orange)
WooJin hardware - shoulder straps (buckles, web adjuster, slider and webbing roller/organizer), side compression straps, sternum strap
17337 Webbing
Main Compartment:
#10 YKK RC zippers
3 mesh zippered pockets on the front wall
Pleated sleeve on the back wall, 14.75" tall (375 mm)
Laptop Compartment:
Clamshell opening, #10 YKK RC zippers
Loop patch for Type 1 or Type 2 organizer on the front wall
Document sleeve behind loop patch
2 Tweave pockets below loop patch
Padded laptop sleeve with pleated sides and bottom, with magnetic closure, and will fit laptops up to 15.5" wide x 11.5" deep and 1" thick (394 x 292 x 25 mm)
Padded tablet sleeve
Other Details:
Front loop patch, 9.5" x 1.75" (241 x 44 mm)
Front zippered (#8 YKK RC) pocket hidden behind the loop patch, 9.75" (W) base tapers to 7" top x 6" H (241 -> 178 x 152 mm)
Double side removable compression straps with WooJin buckle with secondary mounting point (front or rear of laptop compartment)