Accessories

Hook back organizers in 210D Ripstop Nylon (Coyote Brown, Gray, Orange, Red) and our custom Crimson Wave UHMWPE ripstop.

• These are designed as the primary organizer for the EVADEs and Pathfinders.
• These measure 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx).
• Can be used as a stand-alone, mounted onto a panel of loop.
• Coyote Brown organizers pair with the Evade 1.5 in 500D OD, Coyote Brown, MCB and Ranger Green.
• The Crimson Wave organizers pair with the Evade 1.0X and 1.5 in X42 Black, X42 Olive, 630D HD Twill and 500D Black.

Type 01 - is without the elastic webbing

Type 02 - is with the elastic webbing

Our Matroskya pouches are named after the Russian nesting dolls of old and designed for the Recon 9 EVADE, Evade 2.0 and now the new Evade 1.5 backpacks. Each set comes with four differently sized pouches, each nested inside the other.

It is currently available in:

• Black
• Red
• Blue
• Clear PVC

Each pouch has 2 (two) zippered compartments; a vertical in front and a horizontal in the rear.

Each pouch is easily mounted by slotting the top 1" rectangular buckle (what we call a hanger) into any PALS webbing setup (what some call a MOLLE panel) or a d-ring of appropriate size so as to hold it in place.

Dimensions of the largest to smallest as follows:

• 15" x 10.75"
• 12" x 8.75"
• 9.5" x 7.75"
• 7.5" x 5.5"

The largest 2 (two) pouches has 2 (two) hangers and the smallest 2 (two) have only 1 (one) each. These pouches are extremely versatile can be used to hold anything from IFAKs, toiletries to a change of clothing.

Strictly only for the Evade 1.5 and 2.0

• 16" H x 11" at the base and it tapers to 6" at the top
• WooJin hardware 

 These are available in:

• 500D Black
• 500D OD, Ranger Green
• 500D Multicam Black 
• 420D Diamond Ripstop Black, Gray and Med Navy (PRE-ORDER)
• 1050D Ballistic Nylon Black
• X42 Black
• X42 Olive
• 630D HD Twill

• Hook back organizers in 210D nylon.
• These are 7” W x 4.5” H (17.8 cm x 11.4 cm approx)
• Can be used as a stand-alone, mounted onto a panel of loop.
• A miniaturized version of our standard Type 02

These are our optional padded hip (waist) belts for our top selling Evade backpacks! The hip belts can also be use for other backpacks as long as the mounting or clip-on point is a webbing that is no more than 1.5"

These are available in:

• 500D Black, OD, Ranger Green
• 500D Multicam Black
• 420D Diamond Ripstop Black, Gray and Med Navy
• 1050D Ballistic Nylon Black
• X42 Black
• X42 Olive
• 630D HD Twill

Please note that these Kits are loop and hook mounted.

A hook & loop removable wrap Holster plus three (3) accessory holders. The wrap Holster is made out of two (2) layers of milspec elastic webbing compared to the single layer that is found in other holsters. The accessory holders are also double layered and can hold a variety of items from double magazines (1 each), single stacks (2 in each), flashlights to multi-tools, etc.

The wrap holster is sized to be able to hold everything from BUGs and J-frame revolvers to Government model 1911s. This holster will also fit a full size pistol with a light as shown in one of the photos; a full size M&P with an X300 mounted.

We've also tested the holster to hold other accessories including an external wireless hard drive!

Replacement sternum straps incorporating Fidlock's 20mm V-Buckle with pull tab.

This is the new Type 1 organizer that has been specifically designed for the new CHIO-X.

Unlike our previous organizers, this one has hardware on both ends that allows it to be clip onto the corresponding elastic webbing mounts inside the rear zippered pocket of the Chio-X.

To assist with keeping it in place and minimize any gap between the organizer and back wall of this rear pocket, a short strip of hook has been added to hold it in place.

• Material, 200D Oxford nylon (change from the previous 210D ripstop)
• These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx) 

Our packing cube set of 3 comprises of the following:

• Large, 14” x 9.75” x 4”, compression

• Medium, 10 x 7.5” x 3.5”, compression

• Small, 11” x 4.5” x 2’, non-compression

  
  

MATERIALS:

• 210D Ripstop Nylon

• Darlington Mesh

• #18 RC YKK Zippers

• WooJin Zipper Pulls

• 17337 Webbing Handle

A carry-on TSA compliant toiletry kit. Gone will be the days of using zip lock bags. The next time you check-in at TSA security, all you have to do is place this T-Kit in the bin and collect it after pronto. So easy.

• Dimension: 9" (W) x 5.75" (H) x 2.25" (D) / 22.9 cm x 14.5 cm x 5.7 cm
• Materials: These are available in PVC and Dimension-Polyant's ODL04 laminate

You can also use these t-kits as a cable organizer, a med kit and keep all your GoPro accessories in one!

We've also personally tested this t-kit in Japan, Singapore, Malaysia, Vietnam, Indonesia, Germany, Belgium and Thailand sans any issues. That said, please note that one customer did have a problem while going through British security. He was asked to empty all into zip lock bags.

A video of a quick leak test we did with this Kit:

Introducing the SLIDER, our latest organizer variant, developed as a result of request from many who are looking for our standard organizers for packs and bags that lack organization. Designed with the same setup and dimensions as our popular Type 01 and 02 organizers, the SLIDER is stiffer.

What sets the SLIDER apart is its unique webbing handle, which allows you to easily move it from one slip pocket to another on your backpack or bag. Unlike our standard organizers, the SLIDER does not come with any hook in the rear or clips.

With the SLIDER, you can keep your EDC gear organized and easily accessible in any slip pocket that is large enough to accommodate it. Upgrade your EDC game with the SLIDER today!

These Sliders are available in both our Type 01 or 02 (with the elastic webbing) configuration.

• Material, 210D nylon ripstop.
• Available in red, orange, black, coyote brown and Crimson Wave
• These are 10.5” W x 6.75” H (26.7 cm x 17.2 cm approx) 

It all started with personal shoe bags I have that don't fit any of my Salomons, Lowas, Vasques, Zamberlans or any of my chukka or desert boots. These easily fit up to a size 13 and some 14s.

Constructed out of 210D Ripstop Nylon (Coyote Brown, Black and Orange), dual #8 YKK reversible zippers, mesh and WooJin molded pulls. Plus a close cell foam padded base.

Photos show examples of selected boots and corresponding sizes of each pair.

Dimensions of each boot bag is 13" x 9.5" 5"

Our new SURGE Tech Pak:

• X42 external fabric
• 210D ripstop inside

Our AMBIT Dopp Kit that is based on the original kit from Sea to Summit. We liked the design so much, we made some tweaks to improve on it.

• This remake of the original is made out of Dimension Polyant's X42
• Lined with 210D ripstop nylon
• And we used tweave type mesh fabric for zippered pockets.
• Zippers are all #10 YKK reverse coil with WooJin hardware.
• Webbing used at all type 17337

 A FlexFit unipanel trucker mesh fitted cap in melange dark grey with our new AON logo!

• Trucker cap with elastic mesh panels
• Fused front panel
• Closed back. Stretch fitted
• Silver undervisor, 8-rows of stitching on visor

• CONTENTS Melange Colorways: 97% Polyester / 3% PU Spandex
• SIZES:
• S/M (6 3/4” - 7 1/4”)
• L/XL (7 1/8” - 7 5/8”)
• PROFILE Mid
• VISOR Curved
• PANELS 5
• CROWN 3 ½" High

Will fit a 4" x 6" flip up vertical opening notebook on the inside right side including the top spiral Rite-in-the-Rain notebooks:

• Field wallet is 8.25" (H) x 5.5" (W) x 0.75" (T)
• Front loop patch is 4.75" (W) x 2.75" (H)
  
• 5 credit card sized pockets on the inside left.
  
• Large sleeve pocket behind the credit card sized pockets.
• The rear of the wallet features a 7 x 3.75" zippered mesh pocket to securely hold small contents.
• Inside right has 6.25" x 4.5" clear lexan area for marking over and/or to hold vertical opening notebook.
• Dual YKK #8 reverse coil zippers.
• Loop along the inside spine of the field wallet.

*Does not include Rite-in-Rain notebook in photo.

Product dimensions:

• When closed 8.25" (H) x 5.5" (W) x 0.75" (T)
• When open 8.25" (H) x 11.5" (W)
• Weight: 3.5 oz

Our hand-made leather watch rolls are carefully designed to carry 3 watches for your travels. This traditional design lies flat when open, and it rolls up into a compact kit, perfect when packing space is a premium. Simply place your watches in the slots, fold the leather flap over, roll, and secure the roll with the leather cord.

Each roll is hand-stitched and therefore is unique, and can vary slightly in color and dimensions.

FEATURES:

• A combination of Japanese and Italian leather
• Holds 3 x watches, 2 x straps and 1 x watch band spring bar tool
• Fastens with matching leather cord

DIMENSIONS:

• Each roll is 11.75" x 6.75" (300mm x 170mm) when laying flat.
• First watch slot is 2.75" wide (69mm) and the other two are 2.5" wide (65mm)
• Strap slots are 1.5" (37mm)

• These are the same buckle sets used for our compression straps
• Sold only in pairs
• Hardware is from WooJin (Quick Attach Champion, W546 + W545)

Replacement 3/4” wide side compression straps for your Evade; this is the same one that comes with all Evade backpacks.

These are sold individually and not a pair.